Innodisk SATADOM-ML 3MG-P is designed as the standard SATA 7 pin connector with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. Regarding of mechanical interference, Innodisk SATADOM-ML 3MG-P absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier. Innodisk SATADOM-ML 3MG-P effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.- MTBF time - 3 million hours!!- Storage Temperature: -55°C ~ +95°C- SATA 6Gb/s interface- iSMART disk health monitoring- Intelligent error recovery system- Excellent data transfer speed- Dram buffer- Write protection security- Zero mechanical interference- Anti-vibration mechanical design Interface SATA III Flash Type MLC P/E cycle 3,000 Capacity 128GB Max. Channels 4 Sequential R/W (MB/sec, max.) 480/160 Max. Power Consumption 2W (5V x 400 mA ) Thermal Sensor WT only Extended DRAM buffer - H/W Write Protect Yes ATA Security Yes S.M.A.R.T Yes Dimension (WxLxH) 35.5 X 30 X 10.8 mm Environment Vibration: 20G @7~2000Hz Shock: 1500G @ 0.5ms Storage Temperature: -55°C ~ +95°C MTBF: 3 million hours TitleDELL/Innodisk SATADOM-ML Industrial Drive SSD 128 Gb 3MG-P Series XCDT7ConditionNew, bulkContentDOM Drive, power cableManufacturerDell/InnodiskModelSATADOM-ML 3MG-PDell P/NXCDT7SKUHDDE002Innodisk P/NDGSML-A28D67SW1QC(F)http://www.compeve.com/LISTING_IMAGES/Computer_Parts_And_Components/Hard_Drives_Storage/Dell/XCDT7/XCDT7_compeve__1.jpg
